|
|
|
|
1969 Camaro Blown SBC alky injected 4.9s
|
| Selected Ad |
| Category: |
Drag Racing |
| Title: |
1969 Camaro Blown SBC alky injected 4.9s |
| Ad
Number: |
23364 |
| Date Posted: |
11/23/2009 |
| Contact: |
Joe Eubank
Glasgow, KY 42141
|
|
|
|
|
|
Description
358 CI SBC race filled GM block, mooneyham 8-71 blower. Static compresion of 13.5-1 be fore the blower. The blower is 34% over driven. It has a callies custom big block snout crank, manley aluminum rods, blower 13.5-1 je pistons, Brodix HIGHLY ported 58cc heads ($3,800), MLS head gaskets, Custom ground cam 270 ext 730 lift int 727 lift ex. with 108 lobe center, bird catcher, erndele injection, erndele cam driven 110 fuel pump, MSD dist. has a race gas electric fuel pump for priming, ARP head studs, Erson roller rockers, stud girdle, manley valves. 2-1/8" primary headers. TCI 2 speed power glide with brake rated @ 2,000 hp, dana 60 rear end, moser axles, full spool. Has a diest 10x10 chute, MSD 7al-2 box, wheelie bars are 55" long, very nice wiring, red top optima duel batterys...... The cage work was done in may of this year. It is 0.83 wall chromoly, and was $6,500 done by skinny kids race cars. The tin work is all new. Used steel for durability,
and has great looking carpet over it. Has a new skinny kids column and quick disconect steering wheel. The front end is full lift off fiberglass, fiberglass doors, hood, and deck lid. The car has a NEW M/T 29x10.5W on
the rear with 15x12 weld wheels, fronts are 25" goodyear front runners on drag lites, Ladder bar setup, Strnage double adj. coilovers, Runs 4.9x's in the 1/8th mile. Heads flow 330 on intake, Could run 4.70's-4.80's with diff set ups, If you turn up the blower it could go mid 4's, Needs to be freshened every 100 passes, OVER $30K invested in motor, ONLY 8 passes on motor and tranny since being built.
Sbc alky injected car. 10.5 Outlaw car. Car is turn key
NO EXPENSE SPARED
It has a current 8.50 cert on the cage. Would need 2 bars in the floors for the 7.50 cert. The welds on the cage are 2nd to NONE... Best looking welds I have seen on a cage. The tin was done in 20# steel. Has new tubs that are steel also. Took the lexan glass out of the rear window and front window, and installed factory glass. Nothing else to say other than its FAST!
$29K Turnkey
$19K Rolling
$13K Motor
$2K Tranny and convertor |
|
|
|
|
|
|