Description
New 100% legal ASCS 360 engine (has 2 nights on it).The heads are new Brodix ASCS casting. New Manley valves (Severe duty), New Manley springs (700 lift). New Manely titanium retainers. These heads have had a competition valve grind done at a cost of $350. The bowls have been blended and flow matched. These heads were sent to Brodix and resurfaced to 59cc from a 67cc. The block is perfect-no damage and the block has never been resleaved. The main caps are splayed. The deck height is 9inch center. The block also has been machined to allow for rod clearance. On the front of the block, The main oil galley plug has been removed and drilled and tapped to allow for front and rear oiling(the best way to do it). Valley plugs are installed. The rotating assembly is balanced. The crank is gun drilled 4340 3.50 stroke Eagle ultra light (42 lbs). The rods are 4340 6 inch Eagle H-beam rated for 8500 rpm. Pistons are JE part # 217796. Total seal rings, Clevite 77 racing bearings. T&D shaft rockers. Fresh Barnes four stage oil pump. Summers Bros Aluminum gear drive. KSE front cover and water pump. Aluminum valve covers (tall). Aluminum oil pan. 12 qt cleanable dry sump oil tank. Camshaft is a Crower 680 lift drilled for accessories. Maxum front motor plate. Remote oil filter with a common NAPA racing oil filter (most NAPA stores carry on there shelves). Hilborn 2-3/16 fuel injection with 16as 3 1/2 long injectors. Mallory Pro Mag 11 and wires. Felpro 1010 head gaskets. This is a drop in and go racing motor. As you can see it has the best of everything in it. And all the work on this motor has been done by Stealy Performance Machine, Of East Moline Il. Any question e-mail me at [email protected] or 1-309-482-3497. This Motor is for sale locally. I prefer local pickup but contact me we can work something out. Will consider trades. Thanks

Online Resources: